Max Clearance Lower Radius Bar Kit Polaris RZR 1000 XP 2017-2020 Black 12mm

Max Clearance Lower Radius Bar Kit Polaris RZR 1000 XP 2017-2020 Black 12mm - SKU: PSRA-RZR1-SB12-B

Description:

A bent rear radius bar on your RZR 1000 XP will hinder your ground clearance and can quickly lead to a broken ride or getting stuck because you’re hung in a rut or on a rock. High Lifter maximized the available space in the rear radius bar area with extreme curvatures to give you the most ground clearance AND still protect your axle with the Arched Radius Bar.
 
Made from 1 ¼” x 3/16” DOM steel tubing, the Max Clearance Series Radius Bar is a beefy addition compared to the OEM bars (3/4”) and other competitors (1”). The simple bolt-on kit also features a 5/8” heim joint with a load rated at 17,955 pounds and polyurethane bushings for rugged durability in the deepest ruts and along the rockiest terrain.
 
When comparing the Max Clearance Series Radius Bar to the competitors, you’ll notice that High Lifter's give the MOST ground clearance across the entire bar and the most strength. Something you won’t find anywhere else. You didn’t spend $20,000 on the BEST UTV on the market to save a few bucks on a weak link! High Lifter’s Max Clearance Series Radius Bar will give you the strength and clearance needed for peace of mind when riding the trails! (Verify Fitment Below)

Features:

• Extreme arches for maximum ground clearance
• 1 ¼” x 3/16” DOM steel tubing
• 5/8” heim joint with a load rating of 17,955 pounds
• Polyurethane bushings
• Simple bolt-on kit
• Instructions complete with photos for a quick install
• High Quality Poweder Coat - (Photos for reference of style only - you will receive color listed)
• Made in the USA
• Note: If you are running the lower radius bar kit with the stock trailing arm, you will need to trim the trailing arm. Instructions for this are included in the product manual. Also, these will not work with most rear bumpers that mount between the radius bars (unless you remove the bumper). Also, 2017 Polaris RZR XP 1000 models have two different types of hardware connecting the rear factory radius bars: 10mm or 12mm bolts. This kit does not fit units that have 10mm factory bolts!