Free Shipping on All Orders

High Lifter Arched Front Lower Control A Arms Polaris RZR XP1000 2014-2016 Red

(No reviews yet) Write a Review
$284.95
SKU:
MCFLA-RZR1-R
UPC:
Does not apply

Out of stock

Product Overview

High Lifter Arched Front Lower Control A Arms Polaris RZR XP1000 2014-2016 Red - SKU: MCFLA-RZR1-R

Description:

Get the MOST clearance from your Polaris RZR 1000 XP without a lift! High Lifter’s Max Clearance Front Lower Control Arms give you the MOST clearance in the front of your RZR without adding a lift, keeping the driveline angles the same as stock. The result? No added wear and tear on other components – such as your CV joints, bearings and ball joints. With this kit, you can run up to 34" tires!

Some companies just put the most bend possible in their kits and jeopardize the axle's safety. High Lifter's kit achieves MAXIMUM clearance and provides MAXIMUM protection for your axles. (Verifty Fitment Below)

Features:

  • The a-arms are crafted from 1 1/16” x .120 wall steel DOM tubing – a serious upgrade from factory materials
  • Each a-arm features additional gussets adding even more strength where you need it most
  • Additionally, the a-arms can reuse your factory ball joints and bushings
  • This kit also includes zirk fittings for optimum placement, avoiding areas where they can hit the frame and break off
  • The kit fits just like stock with no bending, welding, or grinding needed for installation
  • High Quality Powdercoat
  • NOTE: Be sure to check for worn ball joints, bearings, and bushings before installation and replace them if needed


Manufacture: HIGH LIFTER
Model Number: MCFLA-RZR1-R
UPC: Does not apply
Condition: New
Surface Finish: RED
Options 1: N/A
Options 2: N/A
Options 3: N/A
Special Notes: If a you are running the stock/OEM Polaris RZR 1000 wheels, the stock/OEM wheels will rub the rear bar on this control arm kit and will rub the paint off the OEM wheels and control arms at the contact points The rubbing is due to the narrow offset on the stock/OEM wheels. A minimum of 1" wheel spacer is required when running the OEM/stock wheels with this kit.
Instructions: Click to View
Fitment:
2014 Polaris RZR 1000 XP
2014 Polaris RZR 1000 XP 4
2015 Polaris RZR 1000 XP 4 EPS
2015 Polaris RZR 1000 XP EPS
2015 Polaris RZR 1000 XP High Lifter
2016 Polaris RZR 1000 4 High Lifter Edition
2016 Polaris RZR 1000 XP 4 EPS
2016 Polaris RZR 1000 XP EPS
2016 Polaris RZR 1000 XP High Lifter Edition
2016 Polaris RZR TURBO XP EPS

Reviews

(No reviews yet) Write a Review